caddy-website/src/docs/markdown/caddyfile/directives/log.md

title
log (Caddyfile directive)

log

Enables and configures HTTP request logging (also known as access logs).

If you're looking to configure Caddy's runtime logs, you're looking for the log global option instead.

The log directive applies to the host/port of the site block it appears in, not any other part of the site address (e.g. path).

When configured, by default all requests to the site will be logged. To conditionally skip some requests from logging, use the skip_log directive.

• Syntax
• Output modules
  • stderr
  • stdout
  • discard
  • file
  • net
• Format modules
  • console
  • json
  • filter
    • delete
    • rename
    • replace
    • ip_mask
    • query
    • cookie
    • regexp
    • hash
• Examples

Since Caddy v2.5, by default, headers with potentially sensitive information (Cookie, Set-Cookie, Authorization and Proxy-Authorization) will be logged with empty values. This behaviour can be disabled with the log_credentials global server option.

Syntax

log [<logger_name>] {
	hostnames <hostnames...>
	output <writer_module> ...
	format <encoder_module> ...
	level  <level>
}

• logger_name is an optional override of the logger name for this site. By default, a logger name is generated automatically, e.g. log0, log1, and so on depending on the order of the sites in the Caddyfile. This is only useful if you wish to reliably refer to the output of this logger from another logger defined in global options. See an example below.

• hostnames overrides the hostnames that this logger applies to. By default, the logger applies to the hostnames of the site block it appears in, i.e. the site addresses. This is useful if you wish to define different loggers per subdomain in a wildcard site block. See an example below.

• output configures where to write the logs. See Output modules below. Default: stderr.

• format describes how to encode, or format, the logs. See Format modules below. Default: console if stderr is detected to be a terminal, json otherwise.

• level is the minimum entry level to log. Default: INFO. Note that access logs currently only emit INFO and ERROR level logs.

Output modules

The output subdirective lets you customize where logs get written. It appears within a log block.

stderr

Standard error (console, default).

output stderr

stdout

Standard output (console).

output stdout

discard

No output.

output discard

file

A file. By default, log files are rotated ("rolled") to prevent disk space exhaustion.

output file <filename> {
	roll_disabled
	roll_size     <size>
	roll_uncompressed
	roll_local_time
	roll_keep     <num>
	roll_keep_for <days>
}

• <filename> is the path to the log file.
• roll_disabled disables log rolling. This can lead to disk space depletion, so only use this if your log files are maintained some other way.
• roll_size is the size at which to roll the log file. The current implementation supports megabyte resolution; fractional values are rounded up to the next whole megabyte. For example, 1.1MiB is rounded up to 2MiB. Default: 100MiB
• roll_uncompressed turns off gzip log compression. Default: gzip compression is enabled.
• roll_local_time sets the rolling to use local timestamps in filenames. Default: uses UTC time.
• roll_keep is how many log files to keep before deleting the oldest ones. Default: 10
• roll_keep_for is how long to keep rolled files as a duration string. The current implementation supports day resolution; fractional values are rounded up to the next whole day. For example, 36h (1.5 days) is rounded up to 48h (2 days). Default: 2160h (90 days)

net

A network socket. If the socket goes down, it will dump logs to stderr while it attempts to reconnect.

output net <address> {
	dial_timeout <duration>
	soft_start
}

• <address> is the address to write logs to.
• dial_timeout is how long to wait for a successful connection to the log socket. Log emissions may be blocked for up to this long if the socket goes down.
• soft_start will ignore errors when connecting to the socket, allowing you to load your config even if the remote log service is down. Logs will be emitted to stderr instead.

Format modules

The format subdirective lets you customize how logs get encoded (formatted). It appears within a log block.

A note about Common Log Format (CLF): CLF clashes with modern structured logs. To transform your access logs into the deprecated Common Log Format, please use the transform-encoder plugin .

In addition to the syntax for each individual encoder, these common properties can be set on most encoders:

format <encoder_module> {
	message_key     <key>
	level_key       <key>
	time_key        <key>
	name_key        <key>
	caller_key      <key>
	stacktrace_key  <key>
	line_ending     <char>
	time_format     <format>
	time_local
	duration_format <format>
	level_format    <format>
}

• message_key The key for the message field of the log entry. Default: msg
• level_key The key for the level field of the log entry. Default: level
• time_key The key for the time field of the log entry. Default: ts
• name_key The key for the name field of the log entry (i.e. the name of the logger itself). Default: name
• caller_key The key for the caller field of the log entry.
• stacktrace_key The key for the stacktrace field of the log entry.
• line_ending The line endings to use.
• time_format The format for timestamps. May be one of:
  • unix_seconds_float Floating-point number of seconds since the Unix epoch; this is the default.
  • unix_milli_float Floating-point number of milliseconds since the Unix epoch.
  • unix_nano Integer number of nanoseconds since the Unix epoch.
  • iso8601 Example: 2006-01-02T15:04:05.000Z0700
  • rfc3339 Example: 2006-01-02T15:04:05Z07:00
  • rfc3339_nano Example: 2006-01-02T15:04:05.999999999Z07:00
  • wall Example: 2006/01/02 15:04:05
  • wall_milli Example: 2006/01/02 15:04:05.000
  • wall_nano Example: 2006/01/02 15:04:05.000000000
  • common_log Example: 02/Jan/2006:15:04:05 -0700
  • Or, any compatible time layout string; see the Go documentation for full details.
• time_local Logs with the local system time rather than the default of UTC time.
• duration_format The format for durations. May be one of:
  • seconds Floating-point number of seconds elapsed; this is the default.
  • nano Integer number of nanoseconds elapsed.
  • string Using Go's built-in string format, for example 1m32.05s or 6.31ms.
• level_format The format for levels. May be one of:
  • lower Lowercase; this is the default.
  • upper Uppercase.
  • color Uppercase, with console colors.

console

The console encoder formats the log entry for human readability while preserving some structure.

format console

json

Formats each log entry as a JSON object.

format json

filter

Wraps another encoder module, allowing per-field filtering.

format filter {
	wrap <encode_module> ...
	fields {
		<field> <filter> ...
	}
}

Nested fields can be referenced by representing a layer of nesting with >. In other words, for an object like {"a":{"b":0}}, the inner field can be referenced as a>b.

The following fields are fundamental to the log and cannot be filtered because they are added by the underlying logging library as special cases: ts, level, logger, and msg.

These are the available filters:

delete

Marks a field to be skipped from being encoded.

<field> delete

rename

Rename the key of a log field.

<field> rename <key>

replace

Marks a field to be replaced with the provided string at encoding time.

<field> replace <replacement>

ip_mask

Masks IP addresses in the field using a CIDR mask, i.e. the number of bits from the IP to retain, starting from the left side. If the field is an array of strings (e.g. HTTP headers), each value in the array is masked. The value may be a comma separated string of IP addresses.

There is separate configuration for IPv4 and IPv6 addresses, since they have a different total number of bits.

Most commonly, the fields to filter would be request>remote_ip for the directly connecting client, request>client_ip for the parsed "real client" when trusted_proxies is configured, or request>headers>X-Forwarded-For if behind a reverse proxy.

<field> ip_mask {
	ipv4 <cidr>
	ipv6 <cidr>
}

query

Marks a field to have one or more actions performed, to manipulate the query part of a URL field. Most commonly, the field to filter would be request>uri. The available actions are:

<field> query {
	delete  <key>
	replace <key> <replacement>
	hash    <key>
}

• delete removes the given key from the query.
• replace replaces the value of the given query key with replacement. Useful to insert a redaction placeholder; you'll see that the query key was in the URL, but the value is hidden.
• hash replaces the value of the given query key with the first 4 bytes of the SHA-256 hash of the value, lowercase hexadecimal. Useful to obscure the value if it's sensitive, while being able to notice whether each request had a different value.

cookie

Marks a field to have one or more actions performed, to manipulate a Cookie HTTP header's value. Most commonly, the field to filter would be request>headers>Cookie. The available actions are:

<field> cookie {
	delete  <name>
	replace <name> <replacement>
	hash    <name>
}

• delete removes the given cookie by name from the header.
• replace replaces the value of the given cookie with replacement. Useful to insert a redaction placeholder; you'll see that the cookie was in the header, but the value is hidden.
• hash replaces the value of the given cookie with the first 4 bytes of the SHA-256 hash of the value, lowercase hexadecimal. Useful to obscure the value if it's sensitive, while being able to notice whether each request had a different value.

If many actions are defined for the same cookie name, only the first action will be applied.

regexp

Marks a field to have a regular expression replacement applied at encoding time. If the field is an array of strings (e.g. HTTP headers), each value in the array has replacements applied.

<field> regexp <pattern> <replacement>

The regular expression language used is RE2, included in Go. See the RE2 syntax reference and the Go regexp syntax overview.

In the replacement string, capture groups can be referenced with ${group} where group is either the name or number of the capture group in the expression. Capture group 0 is the full regexp match, 1 is the first capture group, 2 is the second capture group, and so on.

hash

Marks a field to be replaced with the first 4 bytes (8 hex characters) of the SHA-256 hash of the value at encoding time. If the field is a string array (e.g. HTTP headers), each value in the array is hashed.

Useful to obscure the value if it's sensitive, while being able to notice whether each request had a different value.

<field> hash

Examples

Enable access logging to the default logger.

In other words, by default this logs to the console or stderr, but this can be changed by reconfiguring the default logger with the log global option:

log

Write logs to a file (with log rolling, which is enabled by default):

log {
	output file /var/log/access.log
}

Customize log rolling:

log {
	output file /var/log/access.log {
		roll_size 1gb
		roll_keep 5
		roll_keep_for 720h
	}
}

Delete the User-Agent request header from the logs:

log {
	format filter {
		wrap console
		fields {
			request>headers>User-Agent delete
		}
	}
}

Redact multiple sensitive cookies. (Note that some sensitive headers are logged with empty values by default; see the log_credentials global option to enable logging Cookie header values):

log {
	format filter {
		wrap console
		fields {
			request>headers>Cookie cookie {
				replace session REDACTED
				delete secret
			}
		}
	}
}

Mask the remote address from the request, keeping the first 16 bits (i.e. 255.255.0.0) for IPv4 addresses, and the first 32 bits from IPv6 addresses.

Note that as of Caddy v2.7, both remote_ip and client_ip are logged, where client_ip is the "real IP" when trusted_proxies is configured:

log {
	format filter {
		wrap console
		fields {
			request>remote_ip ip_mask {
				ipv4 16
				ipv6 32
			}
		}
	}
}

To write separate log files for each subdomain in a wildcard site block, by overriding hostnames for each logger:

*.example.com {
	log {
		hostnames foo.example.com
		output file /var/log/foo.example.com.log
	}
	@foo host foo.example.com  
	handle @foo {
		respond "foo"
	}

	log {
		hostnames bar.example.com
		output file /var/log/bar.example.com.log
	}
	@bar host bar.example.com
	handle @bar {
		respond "bar"
	}
}

To write the access logs for a particular subdomain to two different files, with different formats (one with transform-encoder plugin and the other with json).

This works by overriding the logger name as foo in the site block, then including the access logs produced by that logger in the two loggers in global options with include http.log.access.foo:

{
	log access-formatted {
		include http.log.access.foo
		output file /var/log/access-foo.log
		format transform "{common_log}"
	}

	log access-json {
		include http.log.access.foo
		output file /var/log/access-foo.json
		format json
	}
}

foo.example.com {
	log foo
}