diff --git a/src/tools/raid-calculator/raid-calculator.service.ts b/src/tools/raid-calculator/raid-calculator.service.ts
index f9b5809c..9cb0d8a5 100644
--- a/src/tools/raid-calculator/raid-calculator.service.ts
+++ b/src/tools/raid-calculator/raid-calculator.service.ts
@@ -11,7 +11,7 @@ interface RaidType {
 
 const raidCalculations: { [key: string]: RaidType } = {
   raid_0: {
-    about: 'RAID 0 splits data evenly across 2 or more disks without redunancy or fault tolerance creating one large storage space. More info: <a href="https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_0" target="_blank">Wikipedia</a>',
+    about: 'RAID 0 splits data evenly across 2 or more disks without redunancy or fault tolerance creating one large storage space.',
     requirements: 'RAID 0 requires at least 1 disk',
     validate(num: number, size: number, stripeSize: number) {
       return num > 1;
@@ -29,7 +29,7 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_1: {
-    about: 'RAID 1 consists of an exact copy of the data (mirror) across two or more disks. The array will operate as long as at least one drive is operational.  More info: <a href="https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_1" target="_blank">Wikipedia</a>',
+    about: 'RAID 1 consists of an exact copy of the data (mirror) across two or more disks. The array will operate as long as at least one drive is operational.',
     requirements: 'RAID 1 requires at least 1 disk',
     validate(num: number, size: number, stripeSize: number) {
       return num > 1;
@@ -48,7 +48,7 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_5: {
-    about: 'RAID 5 uses block level striping with parity. This allows for fault tolerance with a storage reduction equal to one drive for the parity information. More info: <a href="https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5" target="_blank">Wikipedia</a>',
+    about: 'RAID 5 uses block level striping with parity. This allows for fault tolerance with a storage reduction equal to one drive for the parity information.',
     requirements: 'RAID 5 requires at least 3 disks',
     validate(num: number, size: number, stripeSize: number) {
       return num >= 3;
@@ -67,7 +67,7 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_6: {
-    about: 'RAID 6 is similiar to RAID 5 but with an additional parity block. This allows for an additional disk failure at the cost of storage reduction equal to two drives. More info: <a href="https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_6" target="_blank">Wikipedia</a>',
+    about: 'RAID 6 is similiar to RAID 5 but with an additional parity block. This allows for an additional disk failure at the cost of storage reduction equal to two drives.',
     requirements: 'RAID 6 requires at least 4 disks',
     validate(num: number, size: number, stripeSize: number) {
       return num >= 4;
@@ -86,7 +86,7 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_10: {
-    about: 'RAID 10 is a stripe of mirrors (RAID 1 + RAID 0). Each set of drives is mirrored and striped together so that each drive in the set is fault tolerant within the group. More info: <a href="https://en.wikipedia.org/wiki/Nested_RAID_levels#RAID_10_(RAID_1+0)" target="_blank">Wikipedia</a>',
+    about: 'RAID 10 is a stripe of mirrors (RAID 1 + RAID 0). Each set of drives is mirrored and striped together so that each drive in the set is fault tolerant within the group.',
     requirements: 'RAID 10 requires an even number of at least 4 disks',
     validate(num: number, size: number, stripeSize: number) {
       return num >= 4 && num % 2 === 0;
@@ -105,7 +105,7 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_50: {
-    about: 'RAID 50 stripes multiple RAID 5 arrays together (RAID 5 + RAID 0). Each RAID 5 set can sustain a single drive failure. More info: <a href="https://en.wikipedia.org/wiki/Nested_RAID_levels#RAID_50_(RAID_5+0)" target="_blank">Wikipedia</a>',
+    about: 'RAID 50 stripes multiple RAID 5 arrays together (RAID 5 + RAID 0). Each RAID 5 set can sustain a single drive failure.',
     requirements: 'RAID 50 requires at least 6 disks with 3 minimum per stripe. Stripes must contain an equal number of disks.',
     validate(num: number, size: number, stripeSize: number) {
       return num >= 6 && stripeSize >= 3 && num % stripeSize === 0;
@@ -127,8 +127,8 @@ const raidCalculations: { [key: string]: RaidType } = {
     },
   },
   raid_60: {
-    about: 'RAID 60 stripes multiple RAID 6 arrays together (RAID 6 + RAID 0). Each RAID 6 set can sustain a two drive failures. More info: <a href="https://en.wikipedia.org/wiki/Nested_RAID_levels#RAID_60_(RAID_6+0)" target="_blank">Wikipedia</a>',
-    requirements: 'RAID 50 requires at least 8 disks with 4 minimum per stripe. Stripes must contain an equal number of disks.',
+    about: 'RAID 60 stripes multiple RAID 6 arrays together (RAID 6 + RAID 0). Each RAID 6 set can sustain a two drive failures.',
+    requirements: 'RAID 60 requires at least 8 disks with 4 minimum per stripe. Stripes must contain an equal number of disks.',
     validate(num: number, size: number, stripeSize: number) {
       return num >= 8 && stripeSize >= 4 && num % stripeSize === 0;
     },
diff --git a/src/tools/raid-calculator/raid-calculator.vue b/src/tools/raid-calculator/raid-calculator.vue
index 1a6c5604..0c6438a5 100644
--- a/src/tools/raid-calculator/raid-calculator.vue
+++ b/src/tools/raid-calculator/raid-calculator.vue
@@ -83,7 +83,10 @@ function validateSetup() {
       <p v-if="!inputsValid" class="raidError">
         {{ raidRequirements }}
       </p>
-      <p v-html="raidInfo" />
+      <p>
+        {{ raidInfo }}<br /><br />
+        For more information on RAID types, see <a href="https://en.wikipedia.org/wiki/Standard_RAID_levels" target="_blank">Wikipedia</a>.
+      </p>
     </c-card>
     <c-card title="Results">
       <n-table v-if="inputsValid">