adapt: validation: loading app modules: module name 'tls': provision tls: loading certificates: open cert_notexist.pem: no such file or directory
</code></pre>
Even though that Caddyfile can be adapted to JSON without errors, the actual certificate and/or key files do not exist, so validation fails because that error arises during the provisioning phase. Thus, validation is a stronger error check than adaptation is.
#### Example
To adapt a Caddyfile to JSON that you can easily read and tweak manually:
Generates shell completion scripts. This allows you to get tab-complete or auto-complete (or similar, depending on your shell) when typing `caddy` commands.
To get instructions for installing this script into your specific shell, run `caddy help completion` or `caddy completion -h`.
`--domain` will only serve files through that hostname, and Caddy will attempt to serve it over HTTPS, so make sure any public DNS is configured properly first if it's a public domain name. The default port will be changed to 443.
`<path>` specifies the path to the Caddyfile. If `-`, the input is read from stdin. If omitted, a file named Caddyfile in the current directory is assumed instead.
`--overwrite` causes the result to be written to the input file instead of being printed to the terminal. If the input is not a regular file, this flag has no effect.
`--diff` causes the output to be compared against the input, and lines will be prefixed with `-` and `+` where they differ. Note that unchanges lines are prefixed with two spaces for alignment, and that this is not a valid patch format; it's just meant as a visual tool.
`--plaintext` is the plaintext form of the password. If omitted, interactive mode will be assumed and the user will be shown a prompt to enter the password manually.
In some scripted situations, it may be redundant to print all of the standard modules as well, so you may use `--skip-standard` to omit those from the output.
NOTE: Due to [a bug in Go](https://github.com/golang/go/issues/29228), version information is only available if Caddy is built as a dependency and not as the main module. Use [xcaddy](/docs/build#xcaddy) to make this easier.
Generates manual/documentation pages for Caddy commands and writes them to the directory at the specified path. The output of this command can be read by the `man` command.
`--directory` (required) is the path to the directory into which to write the man pages. It will be created if it does not exist.
Once generated, the manual pages generally need to be installed. This procedure varies by platform, but on typical Linux systems, it's something like this:
<pre><codeclass="cmd"><b>$ caddy manpage --directory man
$ gzip -r man/
$ sudo cp man/* /usr/share/man/man8/
$ sudo mandb
</b></code></pre>
Then you can run `man caddy` (or `man caddy-*` for subcommands) to read documentation in your terminal.
Manual pages are separate documentation from what is on our website. Our website has more comprehensive documentation that is updated often.
Gives the running Caddy instance a new configuration. This has the same effect as POSTing a document to the [/load endpoint](/docs/api#post-load), but this command is convenient for simple workflows revolving around config files. Compared to the `stop`, `start`, and `run` commands, this single command is the correct, semantic way to change/reload the running configuration.
`--config` is the config file to apply. If `-`, the config is read from stdin. If not specified, it will try a file called `Caddyfile` in the current working directory and, if it exists, it will adapt it using the `caddyfile` config adapter; otherwise, it is an error if there is no config file to load.
`--address` needs to be used if the admin endpoint is not listening on the default address and if it is different from the address in the provided config file. Note that only TCP addresses are supported at this time.
`--force` will cause a reload to happen even if the specified config is the same as what Caddy is already running. Can be useful to force Caddy to reprovision its modules, which can have side-effects, for example: reloading manually-loaded TLS certificates.
Starts one or more simple, hard-coded HTTP servers that are useful for development, staging, and some production use cases.
`--status` is the HTTP status code to return.
`--header` adds an HTTP header; `Field: value` format is expected. This flag can be used multiple times.
`--body` specifies the response body.
`--listen` is the listener address, which can be any [network address](/docs/conventions#network-addresses) recognized by Caddy, and may include a port range to start multiple servers.
`--access-log` enables access/request logging.
`--debug` enables more verbose debug logging.
With no options specified, this command listens on a random available port and answers HTTP requests with an empty 200 response. The listen address can be customized with the `--listen` flag and will always be printed to stdout. If the listen address includes a port range, multiple servers will be started.
If a final, unnamed argument is given, it will be treated as a status code (same as the `--status` flag) if it is a 3-digit number. Otherwise, it is used as the response body (same as the `--body` flag). The `--status` and `--body` flags will always override this argument.
A body may be given in 3 ways: a flag, a final (and unnamed) argument to the command, or piped to stdin (if flag and argument are unset). Limited [template evaluation](https://pkg.go.dev/text/template) is supported on the body, with the following variables:
`--internal-certs` will cause Caddy to issue certificates using its internal issuer (effectively self-signed) for the domain specified in the `--from` address.
Both `--from` and `--to` parameters can be URLs, as scheme and domain name will be inferred from the provided URL (paths and query strings ignored). Or they can be a simple network address and not a complete URL.
`--config` specifies an initial config file to immediately load and use. If `-`, the config is read from stdin. If no config is specified, Caddy will run with a blank configuration and use default settings for the [admin API endpoints](/docs/api), which can be used to feed it new configuration. As a special case, if the current working directory has a file called "Caddyfile" and the `caddyfile` config adapter is plugged in (default), then that file will be loaded and used to configure Caddy, even without any command line flags.
`--adapter` is the name of the config adapter to use when loading the initial config, if any. This flag is not necessary if the `--config` filename starts with "Caddyfile" which assumes the `caddyfile` adapter. Otherwise, this flag is required if the provided config file is not in Caddy's native JSON format. Any warnings will be printed to the log, but beware that any adaptation without errors will immediately be used, even if there are warnings. If you want to review the results of the adaptation first, use the [`caddy adapt`](#caddy-adapt) subcommand.
`--envfile` loads environment variables from the specified file, in `KEY=VALUE` format. Comments starting with `#` are supported; keys may be prefixed with `export`; values may be double-quoted (double-quotes within can be escaped); multi-line values are supported.
`--resume` uses the last loaded configuration that was autosaved, overriding the `--config` flag (if present). Using this flag guarantees config durability through machine reboots or process restarts. It is most useful in [API](/docs/api)-centric deployments.
`--watch` will watch the config file and automatically reload it after it changes. ⚠️ This feature is intended for use only in local development environments!
Do not stop the server to change configuration while running in production! That will result in downtime. (This should be obvious but you'd be surprised how many complaints we get about it.) Use the <ahref="#caddy-reload">caddy reload</a> command instead.
Same as [`caddy run`](#caddy-run), but in the background. This command only blocks until the background process is running successfully (or fails to run), then returns.
Use of this command is discouraged with system services or on Windows. On Windows, the child process will remain attached to the terminal, so closing the window will forcefully stop Caddy, which is not obvious. Consider running Caddy [as a service](/docs/running) instead.
Stopping (and restarting) the server is orthogonal to config changes. **Do not use the stop command to change configuration in production, unless you want downtime.** Use the [`caddy reload`](#caddy-reload) command instead.
Gracefully stops the running Caddy process (other than the process of the stop command) and causes it to exit. It uses the [`POST /stop`](/docs/api#post-stop) endpoint of the admin API to perform a graceful shutdown.
The address of this request can be customized using the `--address` flag, or from the given `--config`, if the running instance's admin API is not using the default listen address.
If you want to stop the current configuration but do not want to exit the process, use [`caddy reload`](#caddy-reload) with a blank config, or the [`DELETE /config/`](/docs/api#delete-configpath) endpoint.
Caddy will attempt to install its root certificates into the local trust stores automatically when they are first generated, but it might fail if Caddy doesn't have the appropriate permissions to write to the trust store. This command is necessary to pre-install the certificates before using them, if the server process runs as an unprivileged user (such as via systemd). You may need to run this command with `sudo` to unix systems.
By default, this command installs the root certificate for Caddy's default CA (i.e. "local"). You may specify the ID of another CA with the `--ca` flag.
This command will attempt to connect to Caddy's [admin API](/docs/api) to fetch the root certificate, using the [`GET /pki/ca/<id>/certificates`](/docs/api#get-pkicaltidgtcertificates) endpoint. You may explicitly specify the `--address`, or use the `--config` flag to load the admin address from your config, if the running instance's admin API is not using the default listen address.
You may also use the `caddy` binary with this command to install certificates on other machines in your network, if the admin API is made accessible to other machines -- be careful if doing this, to not expose the admin API to untrusted clients.
This command uninstalls trust; it does not necessarily delete the root certificate from trust stores entirely. Thus, repeatedly trusting and untrusting new certificates can fill up trust databases.
- By specifying a direct path to the root certificate to untrust with the `--cert` flag.
- By fetching the root certificate from the [admin API](/docs/api) using the [`GET /pki/ca/<id>/certificates`](/docs/api#get-pkicaidcertificates) endpoint. This is the default behaviour if no flags are given.
If the admin API is used, then the CA ID defaults to "local". You may specify the ID of another CA with the `--ca` flag. You may explicitly specify the `--address`, or use the `--config` flag to load the admin address from your config, if the running instance's admin API is not using the default listen address.
Replaces the current Caddy binary with the latest version from [our download page](https://caddyserver.com/download) with the same modules installed, including all third-party plugins that are registered on the Caddy website.
Upgrades do not interrupt running servers; currently, the command only replaces the binary on disk. This might change in the future if we can figure out a good way to do it.
The upgrade process is fault tolerant; the current binary is backed up first (copied beside the current one) and automatically restored if anything goes wrong. If you wish to keep the backup after the upgrade process is complete, you may use the `--keep-backup` option.
Similarly to `caddy upgrade`, replaces the current Caddy binary with the latest version with the same modules installed, _plus_ the packages listed as arguments included in the new binary. Find the list of packages you can install from [our download page](https://caddyserver.com/download). Each argument should be the full package name.
Similarly to `caddy upgrade`, replaces the current Caddy binary with the latest version with the same modules installed, but _without_ the packages listed as arguments, if they existed in the current binary. Run `caddy list-modules --packages` to see the list of package names of non-standard modules included in the current binary.
Validates a configuration file, then exits. This command deserializes the config, then loads and provisions all of its modules as if to start the config, but the config is not actually started. This exposes errors in a configuration that arise during loading or provisioning phases and is a stronger error check than merely serializing a config as JSON.
`--adapter` is the name of the config adapter to use, if the config file is not in Caddy's native JSON format. If the config file starts with `Caddyfile`, the `caddyfile` adapter is used by default.
Caddy traps certain signals and ignores others. Signals can initiate specific process behavior.
Signal | Behavior
-------|----------
`SIGINT` | Graceful exit. Send signal again to force exit immediately.
`SIGQUIT` | Quits Caddy immediately, but still cleans up locks in storage because it is important.
`SIGTERM` | Graceful exit.
`SIGUSR1` | Ignored. For config updates, use the `caddy reload` command or [the API](/docs/api).
`SIGUSR2` | Ignored.
`SIGHUP` | Ignored.
A graceful exit means that new connections are no longer accepted, and existing connections will be drained before the socket is closed. A grace period may apply (and is configurable). Once the grace period is up, connections will be forcefully terminated. Locks in storage and other resources that individual modules need to release are cleaned up during a graceful shutdown.
## Exit codes
Caddy returns a code when the process exits:
Code | Meaning
-----|---------
`0` | Normal exit.
`1` | Failed startup. **Do not automatically restart the process; it will likely error again unless changes are made.**
`2` | Forced quit. Caddy was forced to exit without cleaning up resources.
`3` | Failed quit. Caddy exited with some errors during cleanup.
In bash, you can get the exit code of the last command with `echo $?`.
